Booting from the Data Rescue 3 DVD
A second hard drive with adequate space is necessary to recover data and host Data Rescue's workspace. If you have a second internal hard drive in your computer or an external USB/Firewire hard drive attached to your computer, you may use it for this purpose. Make sure you have enough free space to hold the data you wish to recover, plus an additional amount of 2% the size of the volume or disk being scanned.
Connect your secondary storage device now before continuing to the boot DVD steps.
To boot from Data Rescue 3 DVD:
- Insert the Data Rescue DVD into the DVD Drive.
- Restart the computer holding the "C" key.
Continue holding the "C" key until the Apple logo is displayed.
When the Data Rescue 3 DVD boots your Mac the following screen appears for you to choose a "Home Folder".
Agree to EUA
Enter your name and serial number and click "Activate"If you are evaluating Data Rescue 3 click "Demo"
Start New Scan Choose this option if you want to begin scanning a drive. This will be the case for the majority of users who haven't used Data Rescue 3 before.
Resume Suspended Scan If you have suspended, or paused, a previous scan in Data Rescue 3, you can use this option to continue where you last left off. Make sure you have the original drive that was being scanned connected to your computer. If you only have one suspended scan, it will be resumed immediately. Otherwise you will be prompted to choose a scan to resume.
Browse Completed Scans This option is available if you already have one or more completed scans. Selecting this will bring you to the Scan Results where you can locate files for recovery.